PDA

View Full Version : Who Has These ?


CFISHN
02-19-2010, 09:33 PM
WHO HAS THESE ?
http://www.immioutdoors.com/boatbuckle/
http://www.immioutdoors.com/boatbuckle/transom/products_transom_g2.htm

Love em Hate em ?

I'm going to give them a Whirl , any advice ?



*kickrock*
gut wrench
02-19-2010, 09:41 PM
I do..

love them,you can really crank it tight...
DocStressor
02-19-2010, 11:59 PM
I've had both the standard and stainless steel buckles. The standards fell apart after 2 years and got replaced by the stainless model. Don't bother with the standard model if your trailer sees salt or brackish water.

Be sure that you can mount them on your trailer without tilting them more than about 30 degrees or they will open when you hit a bump.
lwilson296
02-21-2010, 09:45 AM
can you use them in salt water?
superfluke
02-21-2010, 06:59 PM
Have them on both my boats.
CFISHN
02-22-2010, 10:35 AM
can you use them in salt water?

They make A Stainless steel set for that !


I've had both the standard and stainless steel buckles. The standards fell apart after 2 years and got replaced by the stainless model. Don't bother with the standard model if your trailer sees salt or brackish water.

Be sure that you can mount them on your trailer without tilting them more than about 30 degrees or they will open when you hit a bump.
NOTHING ELSE MATTERS
02-22-2010, 10:56 AM
Had a set of stainless on 24 foot boat i had. They were great.
excapmarine
02-22-2010, 07:30 PM
I have those on my 19DLX. 1 1/2 yrs already. Love Em!
218Elite08
02-23-2010, 08:57 PM
I've used them for years. I added the stainless steel version on the bow and stern. Zero issues fresh or salt!! The my old man even made me some stainless brackets for them too. :cool:

http://www.carolinaskiffowner.com/album.php?albumid=1&page=2
Hokis
03-15-2010, 09:38 PM
They are good
keeps the clip from rubbing into the gel coat
Beckcl
03-16-2010, 07:51 AM
I have a set, and Raymond Martin is making me a set of brackets for the bunks similar to 218Elite08's. I have the SS version, and love them.
CFISHN
05-03-2010, 03:12 AM
We got out Friday , the first time sine installing the auto re tractors ..
LOVE THEM !
RECOMMENDED FOR ALL FRESH WATER ONLY USERS !
Salt water users Get SS model !
Save time getting in & out ! Holds tight...
Beckcl
05-03-2010, 09:20 AM
Here are the bunk brackets Raymond Martin made for me.
throrope
05-03-2010, 10:10 AM
My wife picked these up. Cheap, easy on/off, hold secure and have a flap/pad to keep the buckle off the hull. Can't see the need for more.

http://www.walmart.com/ip/Transom-Tie-Down-Strap-2-Width-Quick-Release-Buckle-4-Ft.-Length/11071278
NCwill
05-03-2010, 10:36 AM
One of the first things I did to my trailer after I noticed the rear straps that came with the boat were rubbing the gelcoat... got the ss ones... no more gelcoat rubbing, they feel solid and provide for a very secure ride... love em'!
CFISHN
05-03-2010, 05:11 PM
My wife picked these up. Cheap, easy on/off, hold secure and have a flap/pad to keep the buckle off the hull. Can't see the need for more.

http://www.walmart.com/ip/Transom-Tie-Down-Strap-2-Width-Quick-Release-Buckle-4-Ft.-Length/11071278

That's the ones we are replacing with this auto set ....

They are just QUICK & EASY if you trailer a lot *yay*

You know it's just one less thing *thumbsup*
CFISHN
05-03-2010, 05:14 PM
Here are the bunk brackets Raymond Martin made for me.
Ray makes good stuff !

My bunks protrude 6"-8" , I used the optional mounting kit ,it was $10 per side ....