MDCrappie
04-26-2008, 03:40 PM
I have a front deck for a 17' to get rid of. It came off a 1996 - 1765. It should fit either the 1765 or 1965. It also has a SS Pop-Up cleat in the center as well as 2 holes for vertical rod holders.
I also have a T-Top for same. The T-Top has the below dimensions.
Top size = 49" wide x 63" long (front to back)
Legs = 77" long
Width between legs = 29"
Width between legs (front to back) = 12"
Also is the canvas top and an aluminum electronics box that mounts between the support bars. It is made from Stainless 1" tubing, all welded at the corners and junctions. There are 2 mounting holes drilled in each "leg".
The Canvas may need to be replaced with something as I do not know how old it is. It may not hold together under wind pressure, but I do not know. The tubes need to be cleaned up. It's not real pretty right now, but very functional. The electronic box needs to be scraped and painted. It does not look very appealing at all. I'm pretty sure that I have the mounts that attach to the end of the tubes and secure to the deck.
I'm located in Harford County, Md. (21009)
$100 for the T-top and $40 for the Deck. $125 takes it all. Can't ship, needs to be picked up.
I also have a T-Top for same. The T-Top has the below dimensions.
Top size = 49" wide x 63" long (front to back)
Legs = 77" long
Width between legs = 29"
Width between legs (front to back) = 12"
Also is the canvas top and an aluminum electronics box that mounts between the support bars. It is made from Stainless 1" tubing, all welded at the corners and junctions. There are 2 mounting holes drilled in each "leg".
The Canvas may need to be replaced with something as I do not know how old it is. It may not hold together under wind pressure, but I do not know. The tubes need to be cleaned up. It's not real pretty right now, but very functional. The electronic box needs to be scraped and painted. It does not look very appealing at all. I'm pretty sure that I have the mounts that attach to the end of the tubes and secure to the deck.
I'm located in Harford County, Md. (21009)
$100 for the T-top and $40 for the Deck. $125 takes it all. Can't ship, needs to be picked up.